Recruitment Information

2021 Recruitment Plan
Dalian Auto-Tech Industry-automation Equipment Co., Ltd. Job Posting


Tel.:+86-(0)411-86286888
Contact:Sun LingLing
ext.:216
E-mail:zhaopin@dlautotech.com

No. Position No. of Talents Responsibilities Requirements
1 Welding Process Planning Engineer 2 1. BIW production process division and programme development.
2. Make layout drawing, cycle analysis, loading sequence, process distribution, ergonomic analysis, potential risk analysis, etc.
3. Technical communication and list configuration of process equipment.
4. Cooperate with on-site installation and commissioning.
1. College degree or above in Mechanical, Industrial Engineering, Architecture, Civil Engineering or related.
2. CET-4 426 or above, good listening, speaking, reading and writing skills.
3. Those who meet any of the conditions below are preferred:
(1) More than one year experience in BIW process planning or relevant working experience in welding workshop;
(2) Able to read drawings and make drawings, and master any computer software such as AUTOCAD, CATIA, UG, CAXA and Microstation;
(3)Graduates of 2020 with excellent performance, and experience in student union is preferred.
4. Strong sense of responsibility, proactive in work, strong learning ability, communication and coordination ability, and team work ability.
5. Adapt to work overtime and travel on business.
6. Work in Dalian HQ and project sites.
2 Process Quality Engineer 2 1. Master the technology of new material car body process (riveting, gluing, hemming, etc.) and equipment operating.
2. Parameter calculation and offline programming of special process.
3. On-site installation and commissioning instruction of special process equipment.
1. Bachelor degree or above, majored in Mechanical, Material, Automobile or related.
2. CET-4 426 or above, good listening, speaking, reading and writing skills.
3. Those who meet any of the conditions below are preferred:
(1) Have experience in commissioning of Bosh welding equipment or relevant work are preferred, familiar with spot welding, riveting, laser and other process equipment is preferred;
(2)Graduates of 2020 with excellent performance.
4. Strong sense of responsibility, proactive in work, strong learning ability, communication and coordination ability, and team work ability.
5. Adapt to work overtime and travel on business.
6. Work in Dalian HQ and project sites.
3 Mechanical Design Senior Engineer 1 1. Complete the function and structure design of non-standard conveying equipment (conveying, switching, lifting, etc.), force analysis, etc.
2. Make the steel structure design plan.
3. Review the rationality of design results and processing technology.
4. Assisted in solving technical problems on site.
1. Bachelor degree or above, major in Mechanical Design.
2. More than 8 years of experience in the design of automatic conveying equipment, capable of independently designing non-standard equipment (experience related to the welding line of BIW is preferred), proficient in using CATIA software.
3. Master mechanical processing technology, familiar with various metal processing properties.
4 Machine Vision Engineer 1 1. Develop complete visual solutions according to the characteristics and requirements of industrial production lines, including testing, positioning, identification, etc.
2. Responsible for the selection of hardware, including industrial cameras, lenses, light sources, etc., and understand the characteristics of products from different suppliers.
3. Commissioning of visual system.
1. Bachelor degree or above, majored in Computer, Optics, Electrical or Mechanical Automation.
2. CET-4 426 or above, good listening, speaking, reading and writing skills.
3. Those who meet any of the conditions below are preferred:
(1) Experienced in machine vision, proficient in image processing software (such as Halcon, visionpro, designer, etc.), familiar with C# programming;
(2) Have PLC or robot programming and commisioning experience;
(3)Graduates of 2020 with excellent performance.
4. Able to travel for short periods of time.
5 Quotation Engineer 1 1. Complete the international or domestic bidding work assigned by the department, organized and coordinated the bidding team to prepare the bidding books.
2. Supervise and statistics on the completion of each project contract.
3. Participate in technical and business communication and negotiation of various projects.
4. Communicate and coordinate with customers and various departments of the company.
1. Bachelor degree or above, majored in Mechanical, Electrical, Economic, German or related.
2. German CET-4 or above, College English Test 4 (CET-4 426) or above, able to use as working language.
3. Those who meet any of the conditions below are preferred:
(1) More than one year working experience in machinery, automation or automobile industry, with experience in making mechanical or electrical quotation plan;
(2)Graduates of 2020 with excellent performance.
4. Strong sense of responsibility, proactive in work, strong learning ability, communication and coordination ability, and team work ability.
6 Drill Press Operator 1 Use radial drilling machine to process parts according to drawings and process standards. Carry out regular maintenance of machine and report to repair in time if any problem is found. 1. More than 3 years drilling operation experience, proficient in 50 or 80 drilling machine, able to read drawings, machining straight holes, reaming, counterbore, thread, etc.
2. Careful and conscientious in work, strong sense of responsibility.
3. Adapt to overtime work, living near Lvshun is preferred.
7 Gantry Milling Operator 1 Use CNC gantry milling machine to process parts according to drawings and process standards. Carry out regular maintenance of machine and report to repair in time if any problem is found. 1. More than two years of gantry milling operation experience, proficient in gantry milling (8 meters), familiar with FANUC system, can use mastercam software for programming, can program manually, and understand machining process.
2. Careful and meticulous in work, strong sense of responsibility.
3. Adapt to shift work, living near Lvshun is preferred.
8 Machining Inspector 1 Complete the quality inspection of the parts according to the drawing and relevant technical requirements, to ensure that the parts meet the requirements of product use. 1. Technical secondary school or above. Major in Mechanical Processing or Measurement Technology.
2. Able to read mechanical drawing, familiar with mechanical processing technology, fresh graduates are preferred.
3. Careful and meticulous in work, strong sense of responsibility, good communication skills.
4. Adapt to overtime work, living near Lvshun is preferred.
9 Welding Process Planning Engineer 2 1. BIW production process division and programme development.
2. Make layout drawing, cycle analysis, loading sequence, process distribution, ergonomic analysis, potential risk analysis, etc.
3. Technical communication and list configuration of process equipment.
4. Cooperate with on-site installation and commissioning.
1. College degree or above in Mechanical, Industrial Engineering, Architecture, Civil Engineering or related.
2. CET-4 426 or above, good listening, speaking, reading and writing skills.
3. Those who meet any of the conditions below are preferred:
(1) More than one year experience in BIW process planning or relevant working experience in welding workshop;
(2) Able to read drawings and make drawings, and master any computer software such as AUTOCAD, CATIA, UG, CAXA and Microstation;
(3)Graduates of 2020 with excellent performance, and experience in student union is preferred.
4. Strong sense of responsibility, proactive in work, strong learning ability, communication and coordination ability, and team work ability.
5. Adapt to work overtime and travel on business.
6. Work in Nanjing, Shanghai and surrounding cities.
10 Welding Fixture Design Engineer 4 1. 3D and 2D automotive welding fixtures design and production launch.
2. Technical communication and review during the project implementation.
3. Provide technical support for on-site installation and commissioning.
1. College degree or above, majored in Mechanical Design or related.
2. CET-4 426 or above, good listening, speaking, reading and writing skills.
3. Those who meet any of the conditions below are preferred:
(1) More than one year experience in welding fixture design of BIW;
(2)Graduates of 2020 with excellent performance.
4. Strong sense of responsibility, proactive in work, strong learning ability, communication and coordination ability, and team work ability.
5. Adapt to work overtime and travel.
11 Simulation Engineer 2 1. Apply simulation software to carry out robot simulation, including robot layout, interference verification, welding torch selection, planning scheme verification and site data sorting, etc.
2. Participate in the planning work, develope preliminary solutions, and communicate with customers on technology.
3. Provide technical support for on-site installation and commissioning.
1. College degree or above in Mechanical, Electrical or related field.
2. CET-4 426 or above, good listening, speaking, reading and writing skills.
3. Those who meet any of the conditions below are preferred:
(1) More than one year experience in robot simulation and commissioning;
(2) Graduates of 2020 with excellent performance.
4. Strong sense of responsibility, proactive in work, strong learning ability, communication and coordination ability, and team work ability.
5. Adapt to work overtime and travel.
12 Equipment Maintenance Supervisor 1 1. Responsible for the maintenance of BBAC conveyer equipment to ensure the operation of machinery and equipment.
2. Develop equipment maintenance plan, write maintenance guidance manual, provide guidance in the implementation process, and timely update relevant contents.
3. Analyze and summarize equipment failures, and train maintenance personnel.
4. Management of production safety, fire control, environmental protection, engineering construction, etc.
5. Supervise the implementation of repair, overhaul and emergency repair to ensure safe construction, etc.
1. Major in Mechanical, Electrical, Mechatronic Integration, college degree or above.
2. More than 5 years of equipment maintenance experience, including at least 2 years of equipment management experience, understanding of equipment performance and operating principle, strong problem judgment and handling ability.
3. Automobile industry welding, painting, engine transmission equipment maintenance experience are preferred.
4. Strong sense of responsibility, proactive in work, strong learning ability, communication and coordination ability, and team work ability.
5. Adapt to work overtime.
13 Electrical Software Engineer 1 PLC software design, on-site commissioning, production support on BBAC welding project. 1. Bachelor degree, majored in Electrical Automation or related.
2. CET-4 426 or above, good listening, speaking, reading and writing skills.
3. Master at least one PLC programming design software and related software, familiar with the automotive industry software programming standards is preferred.
4. Experience in implementing or participating in software design and debugging of two or more projects; experience in Benz projects is preferred.
5. Strong sense of responsibility, proactive in work, strong learning ability, communication and coordination ability, and team work ability.
14 Intermediate Software Development Engineer 1 1. Able to accurately understand business requirements and independently complete the design and development of business modules of medium difficulty.
2. Investigate and solve technical problems encountered in the development process.
3. Responsible for the development and maintenance of the business system.
1. At least 3 years experience in .Net or JAVA is preferred.
- proficient in C#, ASP.Net MVC, EntityFramework.
- solid knowledge of Java, proficient in Spring MVC, MyBatis, Spring boot and other open source frameworks.
2. Have solid programming skills and good object-oriented design ideas.
3. Familiar with at least one front-end development technology, such as HTML, CSS3, HTML5, Bootstrap, React, etc.
4. Proficient in MySQL or Oracle database and SQL language.
5. Good teamwork, good documentation and communication skills, strong learning ability and problem solving ability.
6. Familiar with Memcached, Redis and other NOSQL, knowing the principle is preferred.
7. Experience in intelligent manufacturing in automotive industry, familiar with relevant business processes is preferred
Total
21