Dalian Auto

Recruitment Information

Contact:Wang Xue
Tel.:+86-(0)411-86286888
ext.:216
E-mail:zhaopin@dlautotech.com

No.	Position	Responsibilities	Requirements
1	Welding process technology manager (German/English) (Dalian HQ)	1. Participate in the project review with customers to review the plan, and offer suggestions for the optimization of the plan. 2. Provide guidance on planning, design, simulation of the documents creation and plans, equipment selection and subcontracting technology related management.	1. More than 5 years of automotive welding industry planning/design experience, BMW, Mercedes-Benz OEMs technical manager project experience is preferred. 2. Fluent in German/English. 3. Accept domestic and foreign business trips. 4. Healthy, strong sense of responsibility, active in work, good learning ability, communication and coordination ability and teamwork ability.
2	Technical Manager (Intelligent Equipment) (German/English) (Dalian HQ)	1. Organized technical review meetings, implemented review results, and coordinate technical issues with OEMs and suppliers. 2. Responsible for tracking and promoting the production of all materials in the planning and design process. 3. In charge of Summarizing and sharing technical problems.	1. Bachelor degree or above, major in German/mechanical engineering. 2. Fluent in German/English. 3. Accept domestic and foreign business trips. 4. Healthy, strong sense of responsibility, active in work, good learning ability, communication and coordination ability and teamwork ability.
3	Welding process planning engineer (German) (Dalian HQ)	1. Carry out process division and plan formulation for BIW welding production line based on body digital model, including layout, cycle time analysis, part loading sequence, process distribution, ergonomics analysis, risk analysis, safety plan, logistics plan, etc., so as to determine the most optimized production line structure while ensuring the product process feasibility. 2. Conduct selection and technical communication of process equipment, and review the configuration list. 3. Solved technical problems during installation and commissioning of production line at the project implementation site.	1. Bachelor degree in Mechanical or industrial engineering. 2. More than 1 year experience in process planning of automobile BIW or related working experience in welding workshop is preferred; Experience in welding fixture design and simulation is preferred,or excellent graduates fluent in German are preferred. 3. Fluent English/German listening, speaking, reading and writing skills,German TEM-8 or English CET-4 or above is preferred. 4. Accept domestic and foreign business trips. 5. Healthy, strong sense of responsibility, active in work, good learning ability, communication and coordination ability and teamwork ability.
4	Welding fixture design engineer (German) (Dalian HQ)	1. Completed the non-standard design and production of automotive automatic production line equipment according to the project requirements, and cooperated with the detailed review of tooling fixtures. 2. Solved technical problems during installation and commissioning of production line at the project implementation site.	1. Major in mechanical design, bachelor degree. 2. More than 3 years of automotive body in white welding fixture design experience, skilled use of design software, or excellent graduates fluent in German is preferred. 3. Good German/English listening, speaking, reading and writing skills, German TEM-8 or English CET-4 or above is preferred. 4. Accept domestic and foreign business trips. 5. Healthy, strong sense of responsibility, active in work, good learning ability, communication and coordination ability and teamwork ability.
5	German/Mechanical/electrical major Graduates of the Class of 2025 (Dalian HQ)	You will receive orientation training in welding process planning, welding fixture design or robot debugging, robot simulation positions. Before graduation,you will need to take a 4-6 month training internship at the headquarters.	1. German, Mechanical design, Industrial engineering, electrical automation, robot related majors, 2025 undergraduate. 2. Have good German/English listening, speaking, reading and writing skills, German CET-4 or above or English CET-4 or above is preferred. 3. Healthy, strong sense of responsibility, active in work, good learning ability, communication and coordination ability and teamwork ability. 4. Internship period: from January to June 2025 5. Excellent interns have the opportunity to be transferred to permanent positions
6	PLC Engineer (Dalian HQ)	1. Responsible for PLC design, programming, and commissioning of automotive welding production lines, which mainly includes offline PLC programming, virtual commissioning, and online commissioning. 2. Solve PLC technical problems in production line installation and debugging at project implementation site.	1. College degree or above, major in electrical and automation. 2. Have experience in PLC programming and debugging in automotive body-in-white industry or AGV industry, proficient in various types of PLC, and have experience in implementing standard projects of Mercedes-Benz, Volkswagen, BMW and sicar. 3. Good English listening, speaking, reading and writing skills, CET-4 or above is preferred. 4. Accept domestic and foreign business trips. 5. Healthy, strong sense of responsibility, active in work, good learning ability, communication and coordination ability and teamwork ability.
7	Robot Engineer (Dalian HQ)	1. . Responsible for the robot online programming, debugging and project site support in BIW welding production line. 2. Solved technical problems during installation and commissioning of production line at the project implementation site.	1. Major in robotics, Electrical automation, mechatronics or related, college degree or above. 2. More than three years of robot debugging experience in BIW production site, good at KUKA/FANUC robot programming and debugging, familiar with spot welding, handling, stud and other conventional robot debugging technology. 3. Experience in BMW, Mercedes-Benz, Volkswagen and other projects, good at English. 4. Healthy, strong sense of responsibility, active in work, good learning ability, communication and coordination ability and teamwork ability.
8	Robot simulation engineer (Dalian HQ)	1. Utilize simulation software to perform robot simulation, including robot layout, interference verification, welding gun selection, etc. 2. Assist the planning engineer to verify the planning solution. 3. Provide technical services during on-site installation and commissioning.	1. Bachelor degree in Mechanical, Industrial engineering or German related. 2. More than two years of robot simulation experience, proficient in using simulation software. 3. Healthy, strong sense of responsibility, active in work, good learning ability, communication and coordination ability and teamwork ability.
9	Electrical design engineer (Dalian HQ)	1. Responsible for the design of electrical schemes for the products developed. 2. Complete the selection of electrical parts according to the project requirements, and confirm, design, put into production and other technical work concerning electrical interfaces and standards of equipment for each project. 3. Responsible for tracking and solving problems related to electrical hardware and software in the project, product design optimization, etc.	1. Bachelor degree, major in automation, electrical engineering and automation, mechatronics, etc. 2. More than three years of relevant work experience, able to complete related design work independently. Familiar with electric, control, electric control; Ability to complete plc programming independently is preferred. 3. Good English listening, speaking, reading and writing skills, CET-4 or above is preferred. 4. Healthy, strong sense of responsibility, active in work, good learning ability, communication and coordination ability and teamwork ability. 5. Accept domestic travel.
10	Neumatic design assistant Engineer (Dalian HQ)	1. Responsible for the design of pneumatic system drawings of various tooling equipment undertaken by the company. 2. Responsible for the production of purchased parts, the guidance of pneumatic system assembly and the on-site commissioning guidance of equipment.	1. Bachelor degree, major in mechanical design and manufacturing, automation, mechatronics, etc. 2. More than 1 year working experience in pneumatic design, master the principle and process of pneumatic design; Master non-standard structural design, or outstanding graduates are preferred. 3. Good English listening, speaking, reading and writing skills, CET-4 or above is preferred. 4. Healthy, strong sense of responsibility, active in work, good learning ability, communication and coordination ability and teamwork ability. 5. Accept domestic travel.
11	Outsourced equipment Assistant engineer (Dalian HQ)	1. Confirm the equipment list and price according to customer needs and standards, and make equipment selection plans. 2. Communicated with suppliers to confirm the equipment list (including equipment supply scope and interface information, etc.) according to the process plan, and communicated with relevant technical departments of the company to complete the equipment selection and production. 3. During the installation and debugging phase of the equipment entering the factory, communicate, coordinate and deal with the problems in the use and debugging of the equipment.	1. Bachelor degree in Mechanical Design, Industrial Engineering, Welding, Foreign language related major. 2. At least one year of automotive welding process planning, or welding equipment sales, procurement experience is preferred,can accept outstanding graduates. 3. Proficient in software, design software is preferred. 4. Cet-4 or above, with English listening, speaking, reading and writing ability, capble of reading English technical standards. 5. Healthy, strong sense of responsibility, active in work, with good learning ability, communication skills and teamwork skills.
12	Solutions Engineer（Intelligent equipment） (Dalian HQ)	1. Grasp customer needs, implement technical exchanges, and formulate preliminary design plans. 2. Guide planning and non-standard design ideas and directions, participate in project process review. 3. Experience in non-standard automatic production line design and planning is preferred.	1. Major in mechanical, electrical, mechatronics, bachelor degree or above. 2. More than 3 years experience in automation production line planning and design. 3. Familiar with the structure and working principle of automation equipment, understand the design principle of automatic production line, and with a certain understanding of the basic knowledge of non-standard structure design, process and materials. 4.Healthy, strong sense of responsibility, active in work, with good learning ability, communication skills and teamwork skills.
13	Java Software development assistant engineer (Dalian HQ)	1. Responsible for the research and development, debugging, maintenance and upgrade of AGV body control software, vehicle equipment control software and corresponding tools. 2. Guide and train application engineers to master software applications of related products and solve software problems. 3. Provide technical support on the project site.	1. Bachelor degree or above, major in computer, software development or related. 2. Have Java internship experience, outstanding fresh graduates are also considered. 3. Have basic knowledge of mathematics and kinematics, master common basic algorithms and mathematical simulation software is preferred; Experience in software system design and debugging of AGV (or non-standard automation products) is preferred. 4. Healthy, strong sense of responsibility, active in work, with good learning ability, communication skills and teamwork skills.
14	Machine vision engineer (Dalian HQ)	1. Develop complete visual solutions according to the characteristics and requirements of industrial production lines, including detection, positioning, identification, etc. 2. Responsible for hardware selection, including industrial cameras, lenses, light sources, etc., and understand the product characteristics of different suppliers. 3. Debugging of visual system.	1. Bachelor degree or above, major in computer, optics, electrical or mechanical automation. 2. Be able to listen, speak, read and write in English and read English technical standards. 3. Experience in machine vision, proficient in image processing software, familiar with C# programming. 4. Healthy, strong sense of responsibility, active in work, with good learning ability, communication skills and teamwork skills.
15	Sales engineer（Intelligent equipment） (Dalian HQ)	Completed company research, competitor analysis, domestic market information summary report, company sample update, quotation platform management, etc.	1. Bachelor degree or above in mechanical manufacturing, electrical engineering, etc. 2. Good English listening, speaking, reading and writing skills, CET-4 or above is preferred. 3. Good communication skills, negotiation skills, organizational skills, business skills, strong learning ability and innovative spirit, strong execution. 4. Accept short-term domestic business trips.
16	Gantry machining center operator (Dalian HQ)	1. Independently operate the processing parts of Longmen machining Center according to the drawings and technological standards, and maintain the machine tools regularly. 2. Analyze the complexity of the parts and design the birthware to ensure the machining accuracy requirements.	1. Under 35 years old, major in mechanical engineering, technical secondary school or above. 2. More than three years of gantry milling operation experience, familiar with gantry machining center (8 meters), familiar with FANUC system, can use mastercam software programming. 3. Master machining technology and process, understand machining drawings, use tools correctly and reasonably. 4. Good health, strong sense of responsibility, active in work and adaptable to double shift.
17	Riveter (Dalian HQ)	Group alignment and calibration according to the drawings, inspect the dimension and position, and complete the team alignment on schedule.	1. Under 45 years old, technical school or technical secondary school degree or above. 2. More than three years of riveter work experience, familiar with welding parts processing standards. 3. Healthy body, strong sense of responsibility, serious and meticulous work, living near Lvshun is preferred. 4. Special operation certificate.
18	Fitter (Dalian HQ)	Automobile welding production line equipment assembly, site installation and commissioning.	1. Mechanical related major, technical secondary school degree or above, fresh graduates preferred. 2. Have a certain ability of mechanical drawing reading, assembly fitter experience is preferred. 3. Under 25 years old, healthy, strong sense of responsibility, initiative, good communication skills and learning ability. 4.Accept domestic travel.
19	Equipment maintenance fitter (Dalian HQ)	Responsible for the repair, maintenance, and upkeep of CNC production equipment and mechanical infrastructure within the company,, to ensure the normal operation of the equipment.	1. Experience in electrical and operating system repair and maintenance of machining equipment; Familiar with the principle of mechanical equipment and safety precautions; Master the working principle of NC machine tool control system, and can read and write the program. 2. Experience in vertical machining center, horizontal machining center, gantry machining center and other CNC machine maintenance is preferred. 3. Under 45 years old, healthy, responsible and active in work. 4. Adapt to shift work, living in Lvshun is preferred.
20	Accounting（German） (Dalian HQ)	1. Responsible for the accounting tasks of the German subsidiary, including banking, accounts receivable/payable, expenses, and inventory management. 2. Responsible for reconciling accounts between German subsidiaries and parent companies. 3. Responsible for checking and clearing the current accounts of the German subsidiary regularly.	1. Bachelor degree, major in German, either previous graduates or outstanding candidates from the class of 2025 are acceptable. 2. Proficient in using software. 3. Priority will be given to those with a Level 4 or above in German proficiency tests, possessing good listening, speaking, reading, and writing skills in German. 4.Healthy, strong sense of responsibility, active in work, with good learning ability, communication skills and teamwork skills.
21	Welding process planning engineer （Beijing Branch）	1. Carry out process division and plan formulation for BIW welding production line based on body digital model, including layout, cycle time analysis, part loading sequence, process distribution, ergonomics analysis, risk analysis, safety plan, logistics plan, etc., so as to determine the most optimized production line structure while ensuring the product process feasibility. 2. Conduct selection and technical communication of process equipment, and review the configuration list. 3. Solved technical problems during installation and commissioning of production line at the project implementation site. Answer technical questions raised by customers; Production line cycle time optimization, etc.	1. Bachelor degree, major in mechanical, mechatronics, Industrial engineering, vehicle engineering. 2. More than 1 year experience in the process planning of the welding line of the automobile body in white, familiar with the vehicle manufacturing process, understand the body structure, familiar with the welding technology of various mainstream models. 3. English can be used as the working language for English meetings and project communication. 4. Good health, strong sense of responsibility, proactive work, good professional ethics and team spirit. 5. Possess strong problem-solving skills, communication skills, planning, and execution abilities. 6. Accept overtime and travel.
22	Mechanical design engineer （Beijing Branch）	1. According to the project requirements, complete the design and production of non-standard equipment for automobile welding projects or final assembly projects, and cooperate with technical review. 2. Solve technical problems in production line installation and commissioning at the project implementation site.	1. Major in mechanical design and manufacturing, mechatronics, bachelor degree. 2. More than three years experience in the design of welding fixture or non-standard equipment in the automotive industry, skilled in the use of design software. 3. English can be used as the working language for English meetings and project communication. 4.Health, strong sense of responsibility, proactive work, good professional ethics and team spirit. 5. Possess strong problem-solving skills, communication skills, planning, and execution abilities. 6. Accept overtime and travel.
23	Project assistant manager （Beijing Branch）	1. Led the team to complete the on-site installation and commissioning of the body-in-white welding production line until acceptance by customers. 2. Controlled the time node, schedule, quality and cost of the entire project, communicated and coordinated with customers (automobile OEM) and the inner company to solve various problems and ensure the smooth progress of the project. 3.Management of project team and suppliers.	1. Mechanical, electrical or management related major, bachelor degree. 2. German or English can be used as working language, German and English bilingual is preferred. 3. Experience in automotive welding project site management or translation is preferred, experience in Mercedes-Benz project management is preferred. 4. Able to work overtime and travel arrangements. 5. Health, strong sense of responsibility, strong communication and coordination ability, teamwork ability, global awareness, learning ability and executive ability.
24	Electrical engineer for equipment maintenance （Beijing Branch）	1. Analyze and troubleshoot equipment faults, and restore equipment operation within the specified time to ensure the smooth production of customers. 2. Maintain, upkeep and calibrate the welding conveyor equipment, and provide technical support and training for customers. 3. Guide maintenance workers to install, debug and maintain the equipment. 4. Solve the technical problems of the equipment and form a report. 5. Regularly conduct skill training for maintenance workers to improve the skill level of the team.	1. College degree or above, major in mechanical, electrical, mechatronics, with English reading ability. 2. Proficient in at least one PLC programming and debugging skills, familiar with communication protocols, hardware configuration, dealing with communication problems between hardware and PLC, viewing network topology and troubleshooting equipment. 3. Experience in maintenance and debugging of SICK scanner, grating and Keyns scanner grating is preferred. 4. Understand the working principle of frequency converter, can use frequency converter debugging software and have debugging experience, and can handle common fault alarms. 5. Proficient in weak current control skills (understand the common electrical control principle and the working principle of electrical components, have experience in dealing with trip, short circuit, overload, etc.), can read electrical drawings. Hold electrician's license. 6. Experience in welding, painting or engine conveying equipment maintenance management in the automotive industry is preferred. 7. Have the ability to analyze the cause of equipment failure, judge and deal with problems, and have good communication skills. 8. Healthy, serious and responsible, able to accept shift work.
25	Welding process planning engineer （Shenyang Branch）	1. Carry out process division and plan formulation for BIW welding production line based on body digital model, including layout, cycle time analysis, part loading sequence, process distribution, ergonomics analysis, risk analysis, safety plan, logistics plan, etc., so as to determine the most optimized production line structure while ensuring the product process feasibility. 2. Conduct selection and technical communication of process equipment, and review the configuration list. 3. Solved technical problems during installation and commissioning of production line at the project implementation site.	1. Bachelor degree in Mechanical or industrial engineering. 2. More than 1 year experience in process planning of auto body in white or related working experience in welding workshop is preferred; Experience in welding fixture design and simulation is preferred. 3. Fluent English listening, speaking, reading and writing skills, CET-4 or above is preferred 4. Healthy, strong sense of responsibility, active in work, good learning ability, communication and coordination ability and teamwork ability.
26	Fitter （Shenyang Branch）	Assembly, on-site installation, and commissioning of automotive welding production lines and related automated production line equipment.	1. Mechanical related major, technical secondary school or above. 2. Have a certain ability of mechanical drawing reading, assembly fitter experience is preferred. 3. Under 40 years old, healthy, strong sense of responsibility, initiative, good communication skills and learning ability. 4.Accept business trips to Shenyang and surrounding cities.
27	Welding process planning engineer （Hefei Branch）	1. Process division and plan formulation of biauto welding production line were carried out in combination with body digital model, including layout, beat analysis, upper part sequence, process distribution, ergonomics analysis, risk analysis, safety plan, logistics plan, etc., so as to determine the optimal production line structure while ensuring the product process feasibility. 2. Conducted selection and technical communication of process equipment, and reviewed the configuration list. 3. Solved technical problems during installation and commissioning of production line at the project implementation site.	1. Bachelor degree in Mechanical or industrial engineering. 2. More than 1 year experience in process planning of auto body in white or related working experience in welding workshop is preferred; Experience in welding fixture design and simulation is preferred. 3. Fluent English listening, speaking, reading and writing skills, CET-4 or above is preferred 4. Healthy, strong sense of responsibility, active in work, good learning ability, communication and coordination ability and teamwork ability.
28	Welding fixture design engineer （Hefei Branch）	1. Completed the non-standard design and production of automotive automatic production line equipment according to the project requirements, and cooperated with the detailed review of tooling fixtures. 2. Solved technical problems during installation and commissioning of production line at the project implementation site.	1. Major in mechanical design, bachelor degree. 2. More than 3 years of automotive body in white welding fixture design experience, skilled use of design software. 3. Fluent English listening, speaking, reading and writing skills, CET-4 or above is preferred. 4. Healthy, strong sense of responsibility, active in work, good learning ability, communication and coordination ability and teamwork ability.
29	PLC Engineer （Hefei Branch）	1. PLC software design, programming, and on-site commissioning for automotive welding production lines, as well as accompanying production during the project. 2. Resolve technical issues in the installation and commissioning of production lines at the project implementation site.	1. College degree or above, major in electrical and automation. 2.More than 2 years experience in body in white welding line sicar or Volkswagen standard PLC debugging. 3.Accept domestic and foreign business trips. 4. Healthy, strong sense of responsibility, active in work, good learning ability, communication skills and teamwork skills.
30	Fitter （Hefei Branch）	Assembly, on-site installation, and commissioning of automotive welding production lines and related automated production line equipment.	1. Mechanical related major, technical secondary school or above. 2. Have a certain ability of mechanical drawing reading, assembly fitter experience is preferred. 3. Under 40 years old, healthy, strong sense of responsibility, initiative, good communication skills and learning ability. 4.Accept business trips to Hefei and surrounding cities.
31	Welding fixture design engineer （Changchun Branch）	1. Completed the non-standard design and production of automotive automatic production line equipment according to the project requirements, and cooperated with the detailed review of tooling fixtures. 2. Solved technical problems during installation and commissioning of production line at the project implementation site.	1. Major in mechanical design, bachelor degree. 2. More than 3 years of automotive body in white welding fixture design experience, skilled use of design software. 3. Fluent English listening, speaking, reading and writing skills, CET-4 or above is preferred. 4. Healthy, strong sense of responsibility, active in work, good learning ability, communication and coordination ability and teamwork ability.
32	Software development engineer （Cloud Tech.）	1. Able to accurately understand business requirements and independently complete the design and development of moderately difficult business modules. 2. Investigated and solved technical problems encountered in the development process. 3. Responsible for the development and maintenance of business system.	1. more than 5 years of work experience, or at least two years of experience in ERP, MRP, MES system development in manufacturing enterprises; 2. proficient in Java development language, proficient in Eclipse development tools; 3. proficient in Spring boot, Hibenate, Mybiats, and familiar with Tomcat and Apache; 4. proficient in relational databases and skilled use of SQL language; 5. proficient in at least one of the following front-end frameworks: Vue, React, proficient in VS Code development tools; 6. Strong logical thinking, good teamwork ability, document and communication skills, learning ability and problem solving ability. 7. able to accept a certain amount of business travel, have intelligent manufacturing experience in the automotive industry, familiar with the relevant business process is preferred.
33	Solutions Engineer （Dalian HQ）	Assist the project manager to make the proposal	1. Fluent communication in English or German required; bilingual candidates in German and English will be given priority. 2. Interested in automotive/new energy production line solutions, candidates with good work experience will be preferred. 3. Professional, diligent, hard-working, communicative, and ambitious. 4. Candidates with a background in mechanical and electrical engineering will be given priority. 5. Career progression towards Solution Manager, the company offers comprehensive technical training.

Dalian Auto-Tech Industry-automation Equipment Co., Ltd. Job Posting